ARC AUDIO PS8-PRO
8 Channel DSP Processor
$ 6,199.00TT
Price VAT Inclusive
PS8-Pro: Competition-Proven DSP Performance Without Compromise
Designed by legendary car audio engineer Robert Zeff and backed by years of wins in the world’s most demanding sound quality competition formats, the PS8-Pro is ARC Audio’s flagship 8-channel standalone processor—and a true benchmark for high-end system tuning.
Built on ARC Audio’s advanced Pro-Series DSP platform, the PS8-Pro delivers refined signal processing capable of handling up to 96kHz/32-bit resolution, putting absolute precision in your hands—no canned auto-tuning, no compromises. It includes built-in high-resolution optical digital inputs and can also accept digital coaxial inputs via ARC Audio’s optional D.O.C. Adapter, offering flexible connectivity for a variety of source devices. Paired with ARC Audio’s DNA Tuning Software, the PS8-Pro unlocks the full power of the Pro-Series platform, providing one of the most detailed and flexible tuning interfaces available today.
With up to 296 bands of third-octave or fully customizable parametric EQ, ultra-fine adjustable channel delay, dual-routing signal mixers, output trim control, and a deep library of crossover options, the PS8-Pro lets you dial in your system with total accuracy and musicality.
Can’t replace the OEM source? No problem. The PS8-Pro makes OEM integration seamless, with input compatibility from 0.5V to 32Vrms (via RCA or speaker level), intelligent DC/signal-based turn-on, and full iDatalink Maestro AR support for plug-and-play installs in a wide range of factory-amplified vehicles.
Whether you’re building a championship-winning competition system or a finely tuned daily driver, the PS8-Pro delivers unmatched flexibility, control, and sound quality—no compromises, just results.
| Processor Type | Stand-Alone Unit |
| Processor Resolution | Fixed Point Native 32-Bit |
| Main DSP Processor | Analog Devices ADAU1462 |
| ADC (Analog to Digital Converter) | (Dual) AKM Velvet Sound 5558B |
| DAC (Digital to Analog Converter) | AKM Velvet Sound AK4438 |
| Total DSP Channels | 8 |
| Dual Footprint Op-Amp Design | No |
| RCA Channels Out | 8 |
| RCA Output Voltage | Up to 8V |
| Input Channels (Analog) | 8 |
| Input Channels (Analog Type) | Differential (RCA or Speaker Level) |
| Input Sensitivity (Analog) | .5V – 32V RMS |
| Input Impedance (Analog) | 10k Ohms |
| Input Gain Type | “Dedicated” Selection by channel “Pairs” in Input Mixer Utility |
| Optical Input | Toslink |
| Digital Coaxial Input | Yes – Requires D.O.C. Adapter |
| Max Digital Input Sample Rate | 96kHz |
| Frequency Response | 10Hz – 23.5kHz |
| S/N Ratio 1V 1:1 | 107.1dB |
| S/N Ratio 4V 1:1 | 108.4dB |
| S/N Digital | TBD |
| DSP Operating Voltage | 8V – 17.1 (Start Stop Compliant to 4.5V) |
| Auto-Sense Turn-on | Yes – Signal & DC (BTL) (Uses Ch 1/2 Analog Inputs Only) |
| User Defined Presets | Up to 4 |
| Preset Control Without PC Or Controller | Yes – Optional Manual Trigger Switches +/- for up to 4 presets (Not Included) |
| Compatible External Control (Optional) | Yes – PSC or LR-2 (Sold Separately) |
| Dual External Control Use (Optional) | Yes – PSC & LR-2 (Simultaneously) |
| AXP Wifi Control Adapter Card | Optional accessory (Sold Separately) |
| DSP Integrated On/Off Timing Control | Device Turn-on (Up to 40ms), Turn on Hold (Up to 40ms), Auto-sense hold time (up to 200ms) |
| DC Input Jack | Yes |
| External Amplifier Remote “Turn-on Output” On/Off Timing Control | Remote Turn on lead output adjustable from .05 – 40 seconds |
| iDatalink Maestro Amplifier Replacement Interface Capable | Yes – Requires Vehicle compatible replacement module & T-Harness and ARC/iData signal harness adapter |
| iDatalink Maestro Compatibility List | Check here |
| Multi-Processor System Expandability | Yes – Requires each processor be connected with a full-time USB connection to a non-amplified USB hub. Also allows for full control of multiple DSPs with a single PC and GUI |
| Copper Series Matching Trim Package | Yes (Optional Sold Separately) |
| USB Connection Type | USB-Micro |
| Tuning Software Interface | ARC Audio DNA Only |
| DNA Tuning Software Interface Download | Download here |
| DNA Software Tuning Features | Click here for tuning features |
| Dimensions | 8.5″(L) x 5.1″(W) x 1.81″(H) |